example 1 example 2
example 3 example 4
example 5 example 6

1. Tom Kor removed the brake drums to inspect the shoes and realated components for damage.

2. After disassembling the rear braking system, Tom cleaned the backing plate area with a solvent.

3. Next, Tom remove the wheel cylinder piston.

4. Then he honed out the cylinder to smooth any pits inside.

5. Again, a solvent cleaner was sprayed into and around the cylinder.

6. The wheel cylinder was then rebuilt with new seals and piston.

C.H. Topping & Company
520 W. Esther St., Long Beach, CA 90813
(562) 432-0901