|
21) Vince inserts the front bearing and places the hub back on the spindle.
22) He lubricated all metal to metal parts with brake lube. Vince applies anti-sieze to the back side of the brake pads.
23) Bunting re-installs the caliper. Sometimes it is necessary to squeeze the piston to fit the caliper assembly back over the rotor. Vince applies silicone adhesive to the areas where the caliper meets the pads in order to hold them in place during re-assembly. He then puts the wheels back on matching the mark on the wheel to the mark on the stud (refer to step 1)
24) C.H. Topping & Co. also ventilates brake drums.
Drive in for a free estimate.
|
